BERGER-SEIDLE | AQUACHOICE | CERAMICSTAR (1 GALLON)

AquaSeal CeramicStar is a two-component, water-based premium class hardwood floor finish based on polyurethane. 

This product is high abrasion resistant, of low viscosity and can be easily applied.

Supported by its ceramic components it provides an outstandingly robust finish. Coated floors useable after 12 hours. Furthermore the product is well suited for renovating old floors by blocking old substances in the floor that may be present. 

Size: 1 Gallon (includes hardener)

Sheen: Semi-gloss, Satin or Ultra Matt

Coverage: 350-550 sqf/gal (depending on the wood surface and method of working)

Use with the following primer:

• AquaChoice FlexPrimer/FlexSealer

Application: AquaSeal CeramicStar is mixed shortly before use, 10:1 with AquaSeal Hardener (included). Mix well right after adding the hardener. Give the mixture 10 minutes to rest, in order to get the optimum usability. The mixture is good for 2 hours (open time) - note that the mixture remains liquid for about 1 day, but after 2 hours it should not be used as the properties dry film finish will be affected. Mix only as much material as you would need. For smaller quantities we recommend using the Berger-Seidle Mix Bottle (1L).

The coating is applied in 3 coats by roller/brush. Highly absorbent wood species for example beech, maple and ash must not be troweled but roller-coated.

Special tips: Contrary to conventional solvent-based finishes, CeramicStar should be applied with more liberal coats. The coating should not be excessively spread with the roller.

Drying: A sufficient dry can be obtained in about 2 hours at a constant temperature of 70° F and 50% relative air humidity. Do not re-coat before the previous coat is sufficiently dry. Insufficient ventilation, lower temperatures, increased coat thickness and erratic air humidity may prolong sufficient drying. Allow the finish to cure 12 hours before exposing to traffic.

 Do not cover with rugs or apply care products for 7 days.